Poloyat.com

Polo Yachting , Yacht Maintenance, Repair and manufacturing center in Antalya

Posts Tagged ‘Yat boyası’

May 19th, 2013

Technical Information

No Comments »

Coat Paints used boats

FINISHING DYES USED BOATS

Perfection

• Excellent performance, two-component polyurethane topcoat

• provide the hardest finish and high wear resistance, chemical curing

• Excellent, providing long lasting vivid color and brightness unique UV protection

• makes professional-quality results

Perfection (Professional)

Perfection (Professional) 2 The best performance, high-gloss topcoat board. Excellent chemical and abrasion resistance,ultra-high-gloss finish for a long time does not lose color. Brush to users,If the roll has formulated spray that lets you get high-quality work. To ensure the longest possible service life combined with the chemical cure polyurethane UV filters.

• A listed, abrasion resistant finish, areas of high rate of obsolescence (sample: deck) is an excellent choice for use in

• Chemically diesel, oil, gasoline, Resistant to acids and alkalis

Toplac

• Very high-quality high-gloss durable yacht enamel

• Silicone alkyd formula lasting twice as long as conventional one-component yacht paints

• Excellent UV resistance

• Enhanced gloss and color retention properties

• Derin, a brilliant finish and easy application

Interdec

• Non-slip polyurethane deck paint

• Non-slip fine mineral additive comprises forming a hard layer

• Suitable for all surfaces

• Brightness of the glare of sunlight is less obstacles

• Roll or brush applied directly out of the box

Danboline

• Sintine, -chain and provides a hard surface for tanks

• Oil, fuel and chemical resistance to gases

• Full coating provides high coverage

• Care is less than,easy to clean

Interspray 800 Glazecoat

Interspray 800 Glazecoat provides superior durability, high quality finishing a two-part polyurethane gloss acrylic lacquer top coat paint. Color is used as the surface of the solid wax in order to strengthen. But also wood or epoxy laminate (including Teak) also used as a high gloss lacquer. The most common areas are the appropriate use of these types of quick-drying varnish is required is a durable floor and railings. Very different temperatures, allowing the user the flexibility to use different boats are available with two sertleştiriciyle.

• finish coating can be repaired

• polished

• Two-speed curing agent

Formula also Interspray 800 Glazecoat'e short “The first institution” ensures that the non-ideal conditions this time would be very useful in applications.

Interior Finish 750

Interior Finish 750 both high brightness and high hiding power and is particularly designed for use in all structures. This is an amazing chemical resistance topcoat provides a durable and tough and easy to clean. Interior Primer 860 Certification will be valid if applied on the Surface Spread of Flame. Descending time walking on the application of surface preparation requirements and speeds up the process faster and reduces the effect of other jobs in the paint.

Interior Finish 770

Interior Finish 770 Especially in the inner regions of the purchase of all types of construction have been formulated for use in. Smooth, With satin-finish product is especially suited for ceilings and very bright areas of the image is not required.

May 12th, 2013

Technical Information

No Comments »

Working paint should be aware of?

Working paint should be aware of?

1-Paint is a dangerous chemical that is flammable and explosive properties.

2-And long-term inhalation of harmful substances contained in the indoor environment should not be.

3-When painting, We have to pay attention to ourselves as well as our environment. Empty boxes, Used brushes and all other areas of waste into the sea and nature, we must not harm.

4-Use adequate and paint as needed, Avoid waste,. When calculating the amount of paint you should know paint becomes space. You can easily calculate the surface area of the hull by the formula:

Water line around the hull area = waterline length X width X 0,7

5-Do not clean the brush with paint thinner.

6-Paint your inbox will not be used for a long time if the increased dye; synthetic characteristics of liner, varnishes and paints on the 1 cm thinner mixture must be stored somewhere mixing container tightly closed and freeze.

7-New drop-down box before opening paint rinsed quickly and certainly should not be confused. Otherwise, you can apply the paint in the future will consist of foams creates many problems and impairs the quality of the paint.

Your Choice: POLO WHETHER Yachting

May 12th, 2013

Technical Information

No Comments »

Old Wooden Painted Surfaces Painting Systems

Old Wooden Painted Surfaces Painting Systems

1- Underwater boat (karina) Painting System:

After the preparation of the above-described two-layer surface coloring process is completed by pulling antifouling.

2- Boat Over Water Painting System:

After the preparation of the above-described surface-bonded polyurethane topcoat is taken to be suitable two-fold.

The Last Word For Painting Systems:

Attention is being applied to the above described systems and multiple applications on the system coat paint systems more include. These systems may seem like a bit more challenging and costly, to the actual implementation of the systems. Accustomed to implement the system will be more comfortable and provide the benefits and value for money are not wasted efforts, you will see facing up. System, which is important when applying, that you receive our warnings. Removal of paint and paint blistering multi-level systems we call good results disclose uygulanılırsa. Perishable rise and low-rise paints thick layers taken. Paint selection is very important to use, tag information, create your own system over time according to the selected paint, Be careful not to go out, but we explained some of the basic applications.

May 12th, 2013

Technical Information

No Comments »

Painting Old Painted Wood Surfaces

Painting Old Painted Wood Surfaces

Surface preparation and cleaning: Cleaned of old paint residues and algae. For the cleaning process, painting instruments previously described methods; spatula, jet engine, iskarpela, such as paint scrapers scraper, using chemicals in the cleaning process is carried out, where necessary, paint remover. Highlights sound, wiped with a cloth and paint thinner before painting the surface should be washed with pressurized water. After cleaning job, polyurethane bonded wood wooden lining segments occur (example boya) drawn. Wood not close depressions liner, WABIEMUR EXTERIOR PASTE thoroughly with spatula, fill gaps and cracks. After the paste is applied to certain liner. Otherwise, the raw wood, may cause deterioration of the structure of the absorbing resin paste. After drying putty sanding is done. Then, on the second floor sanded primer filler is pulled.