May 12th, 2013 
Types and Features of paint used on boats
Synthetic resin paints for boats produced four main groups according to the type. Alkidler, viniller, polyurethanes and epoxies. Alkyd paints can be used on all surfaces on the water, dries quickly and the market price is lower than others. Vinyl-type dyes used especially in the hull may be applied to other regions,. Soft properties and abrasion-resistant coating. Removes paint applied on the. Surfaces so the paint can not be dyed or vinyl earlier must be ensured that. If it is not, paint surface must be cleaned very carefully before. Otherwise, vinyl, and removing the bad look to disrupt the formation of other paints, will cause damage to our boat accomodates both. Polyurethane coatings are generally used in the sections above water and are highly resistant to abrasion, oil, dirty, suitable for use in a salty. In sun-exposed areas of your boat can safely use. Other than the price a bit expensive dyes. Epoxy paints can safely use on all surfaces, resistant paint. Especially suited for steel boats, but it is an expensive paint and color loss is high. Paints, dyes we use higher yield choose to take based on the location. Different places, as it may seem cost-effective to use a different paint, Comparing the problems were profitable in the future we can see where we can carry one of the important characteristics of the dyes may also vary according to the color functions. For example, while trying to get a paint less affected by the sun if you prefer black color will match a logic error in a small but significant. Because the black color absorbs the sun's rays, shows a loss of color more quickly than warm sunny weather in the summer and will cause your boat. This is the main reason for the selection of exterior paints are usually white.
