Posts Tagged ‘yat bakım onarım’

Old Wooden Painted Surfaces Painting Systems

Old Wooden Painted Surfaces Painting Systems

1- Underwater boat (karina) Painting System:

After the preparation of the above-described two-layer surface coloring process is completed by pulling antifouling.

 

2- Boat Over Water Painting System:

After the preparation of the above-described surface-bonded polyurethane topcoat is taken to be suitable two-fold.

 

The Last Word For Painting Systems:

Attention is being applied to the above described systems and multiple applications on the system coat paint systems more include. These systems may seem like a bit more challenging and costly, to the actual implementation of the systems. Accustomed to implement the system will be more comfortable and provide the benefits and value for money are not wasted efforts, you will see facing up. System, which is important when applying, that you receive our warnings. Removal of paint and paint blistering multi-level systems we call good results disclose uygulanılırsa. Perishable rise and low-rise paints thick layers taken. Paint selection is very important to use, tag information, create your own system over time according to the selected paint, Be careful not to go out, but we explained some of the basic applications.

Painting Old Painted Wood Surfaces

Painting Old Painted Wood Surfaces

Surface preparation and cleaning: Cleaned of old paint residues and algae. For the cleaning process, painting instruments previously described methods; spatula, jet engine, iskarpela, such as paint scrapers scraper, using chemicals in the cleaning process is carried out, where necessary, paint remover. Highlights sound, wiped with a cloth and paint thinner before painting the surface should be washed with pressurized water. After cleaning job, polyurethane bonded wood wooden lining segments occur (example boya) drawn. Wood not close depressions liner, WABIEMUR EXTERIOR PASTE thoroughly with spatula, fill gaps and cracks. After the paste is applied to certain liner. Otherwise, the raw wood, may cause deterioration of the structure of the absorbing resin paste. After drying putty sanding is done. Then, on the second floor sanded primer filler is pulled.

A Designed by Murat Kaplan